1. Dismiss Notice

  2. Dismiss Notice

  3. Dismiss Notice

  4. Dismiss Notice

Update OCTOPLUS JTAG PRO update new here

Thảo luận trong 'Octopus/Octoplus' bắt đầu bởi namnhatrang, 9/9/16.

Chia sẻ trang này

  1. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.1.9 - Galaxy S5, J3, Grand Prime and more!

    [​IMG]

    Octoplus JTAG PRO Software v.1.1.9 is out!

    We have added support for Samsung Galaxy Grand Prime, GT-I8258, some models of Galaxy S5 and Galaxy J3!

    Octoplus Box JTAG PRO Software v.1.1.9 Release Notes: Added support for the following models via eMMC:
    • Samsung SM-G531F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G900J - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G900H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J320P - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I8258 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SCL23 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Fixed parsing of some TOT files (*.tot) All pinouts and repair procedures described in the manual ("Help" button in the Software)
    [​IMG]



    Download Octoplus JTAG PRO Software v.1.1.9
     
    Bài viết mới
    Octoplus/Octopus Box LG New Update bởi admin, 22/7/16 lúc 14:13
    OCTOPLUS SUITE update new bởi namnhatrang, 22/9/16 lúc 23:45
    Tags:
  2. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.2.0 - check this out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.2.0 is out!

    We have added support for LG G5 SE, LG G Slylo, LG Transpyre and Samsung Galaxy Grand Prime!
    Also, we have uploaded new SRF (Smart Repair File) for LG LS996, based on ZV7 firmware version.


    Octoplus Box JTAG PRO Software v.1.2.0 Release Notes:
    Added support for the following models via eMMC:
    • LG H845 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS770 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG VS810PP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G530H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Uploaded new SRF for LG LS996 «LG_LS996_EMMC_BGND3R_ZV7_5.1.1.SRF» Updated pinouts in old SRF for LG LS996 - please uninstall old SRF («Uninstall custom model file(s)» button at «Welcome» tab in the software) and download new «G_LS996_EMMC_BGND3R_ZV4.SRF» («Download *.srf» button) All pinouts and repair procedures described in the manual ("Help" button in the software)
    Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update. For those who have troubles with updating their box firmware version to 1.11 we introduce the so called "compatibility mode" - possibility to use all the latest software versions with old box firmware, but sacrificing some firmware-based improvements.

    When you run software 1.2.0 for the first time it will attempt to update your box firmware to 1.11 if needed. If it fails to do so you will see "box status: not found" message.

    To switch the software to "compatibility mode" do the following:
    1. Close Medusa PRO software
    2. Reconnect the box
    3. Launch 1.2.0 software again

    Also, keep in mind that non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.



    Download Octoplus JTAG PRO Software v.1.2.0
     
  3. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.2.2 - 'Box not connected' fix and more!

    [​IMG]

    Octoplus JTAG PRO Software v.1.2.2 is out!

    Dear Medusa Pro users,

    Due to some architecture bug in MCU we use and our firmware particularities many of you may have encountered "Box not connected" issue and total incapability to repair phones via eMMC interface. Today we are glad to announce that the solution has been found. Below you will find a tutorial on how to repair this problem, in somewhat unusual manner though
    [​IMG]

    Also added support for HTC Desire 601, LG Nexus 5x, Samsung Galaxy J3, Galaxy S3 Progre, Lenovo IdeaTab!

    Octoplus Box JTAG PRO Software v.1.2.2 Release Notes:

    Added support for the following models via eMMC:
    • HTC Desire 601 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H790 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J320H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SCL21 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo A3000F - Read/Write/Erase, Easy Repair, Factory Repair (via scatter), Constructor for Repair Files
    Updated help and pinouts in Smart Repair File for LG MS345 (please re-download SRF).

    Improved showing of progress status while writing scatter firmware of MediaTek based devices.

    Fixed “Cancel” operation for process of writing scatter firmware.

    Improvements in "Content Extractor":
    • Improved process of searching contacts
    • Improved exporting of contacts - added UTF-8 support while exporting into text formats

    Some GUI changes.

    Firmware of Medusa Pro Box has been updated! To update the firmware, please connect the box and only then run the Software. Also you can update box firmware via “Update Box Firmware” button at “Welcome” tab in Software.

    All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    How to Repair box firmware, if box not detected by PC and Box status in Octoplus Pro JTAG Software is “Not connected” after firmware updating.

    To repair box firmware, do the next:
    1. Disconnect all Boxes and other devices from PC.
    2. Run the Octoplus Pro JTAG Software.
    3. Open Control Panel -> Device Manager.
    4. Open (disassemble) Medusa Pro box.
    5. Connect the box to PC via USB cable.
    6. Heat up IC U6 (smaller square MCU) on PCB using hot air gun or soldering iron at 150 °C (300 °F) for a few seconds till “libusb-win32 devices / HSJTAG V0x100” device appears in PC Device Manager and Box status in Octoplus Pro JTAG Software becomes “Connected”. Also LED’s will start blinking at that moment.

      [​IMG]
    7. Go to “Welcome” tab in Octoplus Pro JTAG Software and press “Update Box Firmware” button.
    8. Box firmware should be updated to version 1.13.

    Note! After repairing box firmware you shouldn’t use previous versions of Octoplus Pro JTAG Software, please always use the latest actual software version.

    Note! Tampering seals to repair box won't void your box warranty.


    Download Octoplus JTAG PRO Software v.1.2.2
     
  4. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.2.3 - FRP reset via eMMC and more!

    [​IMG]Octoplus JTAG PRO Software v.1.2.3 is out!

    Released new Box firmware v.1.14, Reset FRP for Qualcomm-based devices, Software improvements and fixes.

    Octoplus Box JTAG PRO Software v.1.2.3 Release Notes:
    Added Reset FRP lock («Reset FRP» button at «Factory repair» tab in Software) for Qualcomm-based devices. With this option you can Reset FRP via eMMC connection Released Box firmware v.1.14. In this firmware version fixed Read/Write operations for Hynix and old Samsung eMMC flash chips. Also improved connection procedure for 4-bit Bus Mode and improved stability Improved Erase operation (now even more faster) while erasing selected partition(s) Improvements in «Partition Manager»:
    • Added Status Bar (Speed, Progress, ETA)
    • Fixed error with saving selected partitions as «*.mpt»
    Some GUI changes All pinouts and Repair procedures are described in Software manuals ("Help" button in Software)
    Note! After repairing box firmware you shouldn’t use previous versions of Octoplus Box JTAG PRO Software, please always use the latest actual software version.


    [​IMG]Download Octoplus JTAG PRO Software v.1.2.3
     
    Hiếu_Mobile_DN thích bài này.
  5. bác chuyên về box hả bác
     
  6. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.2.4 - added MSM8909 and MSM8916 support and more!

    [​IMG]


    Octoplus JTAG PRO Software v.1.2.4 is out!

    Released support for Qualcomm MSM8909 and MSM8916 CPUs, different USB loaders added.
    Also added support via USB for Huawei SCL-L01, Lenovo A6000, LG H635
    and support via eMMC for HTC One X PJ64100, OPPO U705T, Samsung GT-I9003, LG P930, LG E440.


    Octoplus Box JTAG PRO Software v.1.2.4 Release Notes: Released support for Qualcomm MSM8909 and MSM8916 CPUs. Different USB loaders added. Read/Write operations are supported. Added support for the following models via USB:
    • Huawei SCL-L01 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo A6000 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H635 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via eMMC:
    • HTC One X PJ64100 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • OPPO U705T - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9003 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P930 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG E440 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    New features and improvements in "Content Extractor":
    • added support of Full flashes (dumps), which don’t contain partitions inside
    • improved Search operation for media files
    • improved Search operation for contacts and SMS
    • improved recognizing of User data partitions
    Some GUI changes All pinouts and Repair procedures described in the manual ("Help" button in the software)
    Download Octoplus JTAG PRO Software v.1.2.4
     
  7. namnhatrang

    namnhatrang Well-Known Member

    Octoplus Box JTAG PRO v.1.2.5 is out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.2.5 is out!

    Released support for Qualcomm MSM8992, USB LG loader added.
    Also added support via USB for LG H815, LG H818P, LG K600, LG LS991 (in test mode), Huawei Y550-L01, Huawei G620S-L01
    and support for Samsung SM-J100H (One SIM) via eMMC!


    Octoplus Box JTAG PRO Software v.1.2.5 Release Notes: Released support for Qualcomm MSM8992, USB LG loader added. Read/Write/Full Erase operations are supported
    Added support for the following models via USB:
    • LG H815 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H818P - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG K600 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS991 (in test mode) - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei Y550-L01 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G620S-L01 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via eMMC:
    • Samsung SM-J100H (One SIM) - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    All pinouts and Repair procedures described in the manual ("Help" button in the software)



    Download Octoplus JTAG PRO Software v.1.2.5
     
  8. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.2.6 is out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.2.6 is out!

    We released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC.

    Octoplus Box JTAG PRO Software v.1.2.6 Release Notes: Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported. Added support for the following models via USB:
    • LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    Added support for the following models via eMMC:
    • LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    All pinouts and Repair procedures described in the manual ("Help" button in the software).
    * This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.


    [​IMG]


    Download Octoplus JTAG PRO Software v.1.2.6
     
  9. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.2.7 is out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.2.7 is out!

    Uploaded “Live logs” for most supported devices in to the Support Area.
    Added support via USB for Lenovo S856, Huawei G6-L11, Huawei G620-A2 and
    support for Samsung SM-J500H, LG H788, LG H343 via eMMC.


    Octoplus Box JTAG PRO Software v.1.2.7 Release Notes: Added support for the following models via USB:
    • Lenovo S856 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G6-L11 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G620-A2 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via eMMC:
    • Samsung SM-J500H - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H788 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H343 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Uploaded “Live logs” (software logs with the information about correct device data connection) for most supported devices in to the Support Area. “Live logs” will be useful for checking correctness of your device connection - just compare log of connection operation of your device with “Live log” from the Support Area.

    Added more detailed operations’ logging

    All pinouts and Repair procedures described in the manual ("Help" button in the software)[​IMG]


    Download Octoplus JTAG PRO Software v.1.2.7
     
  10. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO Software v.1.2.8 is out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.2.8 is out!

    Added support via USB for LG D390N, LG H525N, LG VS986W and
    support for Samsung SM-T310, LG D390N, LG H410 and LG P895 via eMMC.
    Uploaded new “Live logs” into the Support Area.


    Octoplus Box JTAG PRO Software v.1.2.8 Release Notes: Added support for the following models via USB:
    • LG D390N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H525N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG VS986W - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via eMMC:
    • Samsung SM-T310 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D390N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H410 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P895 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    New features and improvements in «Content Extractor»:
    • Added view of deleted data in contacts and SMS DBs ("Show unallocated data" button)
    • Improved media files recognition in supported FS
    Uploaded new “Live logs” into the Support Area All pinouts and repair procedures described in the manual ("Help" button in the software)
    [​IMG]


    Download Octoplus JTAG PRO Software v.1.2.8
     
  11. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO Software v.1.2.9 is out!

    [​IMG]


    Dear friends!


    We wish you and your family a sweet and beautiful New Year! Let this time bring happiness, love, and prosperity to your home and life.
    May every day of the new year bring pleasant events, satisfaction from your achiements, new horizons, and happiness!
    Thank you for every day out of 365 days we’ve spent together. Be sure we will further please you with new regular updates!

    Please note, that we will be on holidays from December 29th till January 3rd. All support issues will be postponed during this period. See you next year!

    Octoplus Box Team
    Octoplus JTAG PRO Software v.1.2.9 is out!

    Released new Samsung eMMC features: «Smart Report», «Factory Format», «Write CSD», «Write/Update firmware»).
    Released writing firmware via USB for devices, based on Qualcomm CPUs (Qualcomm raw images with «rawprogram0.xml», «patch0.xml»).


    Octoplus Box JTAG PRO Software v.1.2.9 Release Notes:

    Added new features for Samsung eMMC chips:
    • Samsung Smart Report
      This feature shows extended info (check state) of Samsung eMMC chip such as:
      number of eMMC banks, initialization bad block count, optimal trim size and other information.
    • Samsung eMMC Factory Format
      This feature is intended to format Samsung eMMC chips.
      Note, that after performing Factory Format operation all eMMC data will be erased!
    • Samsung eMMC Write CSD
      This feature allows you to write data to CSD register in Samsung eMMC chips.
    • Samsung eMMC Write/Update firmware
      This feature allows you to update/write eMMC firmware on Samsung eMMC chip.
      If eMMC is not connected in Normal (General) Mode, to write eMMC firmware you should force it into Boot Mode using TestPoint.
      With this update we have added support and firmware for the following Samsung eMMC chips:
      - KMVTU000LM-B503 [VTU00M]
      - KMN5U000ZM-B203 [N5U00M]
      - KMKJS000VM-B309 [KJS00M]
      - KMK5U000VM-B309 [K5U00M]
      - KMJJS000WM-B409 [JJS00M]
      - KLMCG8GE4A-A001 [MCG8GA]
      - KLM8G1WE4A-A001 [M8G1WA]
      List of supported Samsung chips will expand in future software updates.

      To write/update firmware in mentioned above eMMC chips, do the following:
      1. Select «eMMC» interface option
      2. Select «Brand: eMMC_chips»
      3. Select eMMC chip part number in «Model:» software list
      4. Press «Help» button to view eMMC pinout and TestPoint picture. Acknowledge the manual.
      5. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
      6. Press «Connect» button to connect eMMC (if necessary, connect TP to GND)
      7. When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software
      8. Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button


      NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC!
    Box firmware has been updated! To update firmware automatically, it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via «Update Box Firmware» button at «Welcome» tab in Octoplus JTAG PRO software.
    Note, it won't be possible to use mentioned above Samsung eMMC features without updating Box firmware!
    Released writing factory firmware via USB for devices, based on Qualcomm CPUs.
    This feature («Repair devices based on Qualcomm CPU’s using XML files (*.xml)») allows you to Repair/Write factory firmware on devices,
    based on Qualcomm CPUs using firmware with «rawprogram0.xml» and «patch0.xml».
    To make Repair/Write firmware, do the following:
    1. Connect the device to PC in «Qualcomm…9008…» Mode. If necessary, use TP
    2. Select «USB» interface option
    3. Select «Brand: Custom Setting»
    4. Select proper «Device (Core)»
    5. Select proper Qualcomm loader in «Loader» list
    6. Press «Connect» button and wait while device will be connected
    7. Go to «Factory repair» tab
    8. Press «Repair devices based on Qualcomm CPU’s using XML files (*.xml)» button
    9. Select «rawprogram0.xml» and «patch0.xml» files
    10. Press «Write» button to write selected firmware
    Note: some firmware’s XML may contain «modemst1» and «modemst2» partitions for writing.
    Writing of these partitions may lead to loosing phone’s IMEI and calibration data.
    Software will automatically deselect and skip writing of these partitions. If you need to write these partitions, you should manually select (check) them and confirm writing.
    Also, software will automatically make backup (read) these partitions form the phone to «Backup» folder before writing firmware.
    Added possibility to make Repair or Write flash without write data verification («Write data verification» option).To make Smart Repair/Factory Repair/Write flash without write data verification, do the following:
    connect the device, deselect (uncheck) «Write data verification» option in the software and perform Smart Repair/Factory Repair/Write flash operation.
    Made some GUI changes. All pinouts and repair procedures described in the manual ("Help" button in the software)Also, we have improved routines of Sony phones connection, based on Qualcomm MSM7225A via Octoplus JTAG PRO Box
    and we have uploaded «Octoplus JTAG Installer 1.9.5.1» into the Support Area and Octoplus Box site.


    [​IMG]


    Download Octoplus JTAG PRO Software v.1.2.9
     
  12. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO Software v.1.3.0 is out!

    Added support via USB for Xiaomi Mi 4i and Xiaomi Redmi 2 and support for Samsung SM-J200M, Samsung GT-I9100, Samsung GT-I9105, Huawei P7-L10 and Huawei G525-U00 via eMMC.
    Uploaded new “Live Logs” in to the Support Area.

    Octoplus JTAG PRO Software v.1.3.0 Release Notes:


    Added support for the following models via USB:
    • Xiaomi Mi 4i - Read/Write/Erase Full flash, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Xiaomi Redmi 2 - Read/Write/Erase Full flash, Easy Repair, Partition Manager, Constructor for Repair Files.
    Added support for the following models via eMMC:
    • Samsung SM-J200M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung GT-I9100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung GT-I9105 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Huawei G525-U00 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Huawei P7-L10 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    Uploaded SRF for LG D295F into the Support Area («USER UPLOADED SRF» folder) (Thanks to Mr. Leandro_Grilo)

    Uploaded new “Live Logs” into the Support Area.

    All pinouts and Repair procedures described in the manual ("Help" button in the software)

    Also, we have improved routines of Sony phones connection, based on Qualcomm MSM7227A via Octoplus JTAG PRO Box
    and we have uploaded «Octoplus JTAG Installer 1.9.5.2» into the Support Area and Octoplus Box site.


    [​IMG]Download Octoplus JTAG PRO Software v.1.3.0
     
  13. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.3.1 is out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.3.1 is out!

    Added support via eMMC for Samsung SM-G532F, Samsung SM-C105, Samsung GT-P5210, Samsung SCH-R960, LG VS986W and LG F160LV.
    Added GP Area Partitioning features.
    Uploaded new “Live Logs” in to the Support Area.

    Octoplus JTAG PRO Software v.1.3.1 Release Notes: Added support for the following models via eMMC:
    • Samsung SM-G532F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung SM-C105 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung GT-P5210 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung SCH-R960 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG VS986W - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG F160LV - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    Added GP (General Purpose) Area Partitioning features:
    • Read data from GPx partitions.
    • Write data to GPx partitions.
    • Create GP partitions (for devices, which supports GP Area Partitioning).
    Uploaded new “Live logs” in to the Support Area.
    All pinouts and Repair procedures described in the manual ("Help" button in the software)
    [​IMG]

    Download Octoplus JTAG PRO Software v.1.3.1

    Find out more at: www.octoplusbox.com
     
  14. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO Software v.1.3.2 is out!

    [​IMG]
    Octoplus JTAG PRO Software v.1.3.2 is out!

    Added support via USB for LG D160, LG D320n, LG K373
    and support via eMMC for Samsung SM-G900A, Samsung SM-J120AZ, Samsung SM-C101, Huawei Y530-U00, LG K600, LG SU870.

    Uploaded new “Live logs” in to the Support Area.

    Octoplus JTAG PRO Software v.1.3.2 Release Notes:


    Added support for the following models via USB:
    • LG D160 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D320n - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG K373 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via eMMC:
    • Samsung SM-G900A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J120AZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-C101 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei Y530-U00 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG K600 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG SU870 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Released support for "Qualcomm MSM8909" and "Qualcomm MSM8976" cores (general QC USB loaders added). Read/Write/Full Erase operations are supported

    Updated help and pinouts in SRF for Samsung GT-N5100, please re-download SRF file. (thanks to Mr. mirazg)

    Added possibility to select units of measurements (MB, KB, Hex values, Hex blocks) for setting start address and length for reading/writing custom or full flash

    Uploaded new “Live logs” in to the Support Area

    All pinouts and Repair procedures described in the manual ("Help" button in the software)

    [​IMG]

    Download Octoplus JTAG PRO Software v.1.3.2Find out more at: www.octoplusbox.com
     
  15. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO Software v.1.3.3 - small HTC appetizer

    [​IMG]

    Octoplus JTAG PRO Software v.1.3.3 is out!

    Added support for HTC One M8, One M8S, One M7, Desire 820N, Desire 816, Desire 516, Desire 500!

    Uploaded new “Live logs” into the Support Area.

    Octoplus JTAG PRO Software v.1.3.3 Release Notes: Added support for the following models via eMMC:
    • HTC One M8 (OP6B700) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC One M8S (0PKV100) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC One M7 (PN07100) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 820N – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 816 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 500 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Uploaded SRF for HTC Desire 516 into the Support Area («USER UPLOADED SRF» folder) (thanks to Mr. Dr_Wolodya)
    Updated help and pinouts in SRF for LG D618, please re-download SRF file (thanks to Mr. sd2)
    Uploaded new “Live logs” into the Support Area
    Added more detailed operation's logging
    Improved Smart Card communication routines
    All pinouts and Repair procedures described in the manual ("Help" button in the software)
    [​IMG]


    Download Octoplus JTAG PRO Software v.1.3.3
     
  16. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO Software v.1.3.4 is out!

    [​IMG]Octoplus JTAG PRO Software v.1.3.4 is out!

    Added Factory Repair (Boot) for Sony devices.

    Added support for Samsung SM-A500FU, Samsung SM-J700F, Huawei G630-U10, Sony D2303, Sony D5503, Sony D6603 via eMMC and support for OPPO A31 via USB.

    Added possibility to set extended options for boot operation mode.

    Uploaded new “Live logs” in to the Support Area.

    Octoplus JTAG PRO Software v.1.3.4 Release Notes:

    • Sony Factory Repair feature has been released!
    You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported)
    This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported.
    Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing.
    Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.
    • Added support for the following models via eMMC:
    • Samsung SM-A500FU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J700F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G630-U10 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony D2303 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
    • Sony D5503 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
    • Sony D6603 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
    • Added support for the following models via USB:
    • OPPO A31 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Added possibility to set extended options for boot operation mode.
      From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode»
    • Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations
    To update firmware automatically, it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG Pro software
    • Octoplus card firmware has been updated to 2.5 version! To run Octoplus JTAG Pro Software v.1.3.4 and future versions, it is necessary to update card firmware.
      Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions
    • Uploaded Full flash for Huawei G620S-L01 into the Support Area
    • Uploaded new “Live logs” into the Support Area
    • Added more detailed operations’ logging
    • Improved work (parsing) with pit files
    • All pinouts and Repair procedures described in the manual ("Help" button in the software)

    * Note: device should have non-damaged native TA; otherwise device will not be repaired



    [​IMG]

    Octoplus/Octopus Shell Software v1.1.9 is out!

    Octoplus/Octopus Shell Software v1.1.9 Release Notes:
    1. Added smart-card latest firmware compatibility
    2. Minor fixes

    [​IMG]Download Octoplus JTAG PRO Software v.1.3.4Download Octoplus/Octopus Shell Software v1.1.9
     
  17. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.3.5 - Asus devices repair added!

    [​IMG]Octoplus JTAG PRO Software v.1.3.5 is out!

    Added support for Asus Nexus 7 (ME571K), Asus ZenFone 5 (T00F), Asus ZenFone 5 (T00P KL), Asus Memo Pad 7 (K01A), Asus FonePad (K012),
    Nokia XL Dual Sim (RM-1030), Nokia Lumia 635 (RM-975), Samsung Galaxy Win Pro SM-G3812, Samsung Galaxy E5 SM-E500H via eMMC and support for LG US991 and Asus ZenFone 2 (Z00LD) via USB.


    Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported.

    Uploaded new “Live logs” in to the Support Area..

    Octoplus JTAG PRO Software v.1.3.5 Release Notes:
    Added support for the following models via eMMC:
    • Asus Nexus 7 (ME571K) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Asus ZenFone 5 (T00F) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Asus ZenFone 5 (T00P KL) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Asus Memo Pad 7 (K01A) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Asus FonePad (K012) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Nokia XL Dual Sim (RM-1030) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Nokia Lumia 635 (RM-975) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G3812 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. khurram136)
    • Samsung SM-E500H – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via USB:
    • LG US991 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Asus ZenFone 2 (Z00LD) – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported
    Uploaded new “Live logs” in to the Support Area
    Made improvements in Help and Pinout viewer
    All pinouts and Repair procedures described in the manual ("Help" button in the software)
    [​IMG]Download Octoplus JTAG PRO Software v.1.3.5
     
  18. namnhatrang

    namnhatrang Well-Known Member

    Octoplus JTAG PRO v.1.3.6 is out!

    [​IMG]Octoplus JTAG PRO Software v.1.3.6 is out!

    Added support via eMMC (ISP) for HTC Desire Eye M910n, HTC One DS (PN07710), HTC Desire 626 (OPM9120), HTC Desire 510 (OPCV200), Samsung SM-J500FN, Samsung GT-I9505, LG LS665 and HUAWEI Ascend Mate 7 (MT7-L09).

    Uploaded new “Live logs” in to the Support Area.

    Octoplus JTAG PRO Software v.1.3.6 Release Notes: Added support for the following models via eMMC:
    • HTC Desire Eye (M910n) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC One DS (PN07710) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 626 (OPM9120) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 510 (OPCV200) – added Read/Write/Erase, Easy Repair*, Partition Manager, Constructor for Repair Files
    • Samsung SM-J500FN – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9505 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS665 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HUAWEI Ascend Mate 7 (MT7-L09) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Improved create GP partitions procedure
    Added last selected folder setting save in Open Firmware dialog window
    Uploaded new “Live logs” in to the Support Area
    All pinouts and Repair procedures described in the manual ("Help" button in the software)
    [​IMG]Download Octoplus JTAG PRO Software v.1.3.6
     

Chia sẻ trang này

Đang tải...
Similar Threads - OCTOPLUS JTAG PRO
  1. namnhatrang
    Trả lời:
    2
    Đọc:
    125
  2. admin
    Trả lời:
    21
    Đọc:
    1,702
  3. admin
    Trả lời:
    24
    Đọc:
    915
  4. admin
    Trả lời:
    6
    Đọc:
    580
Đang tải...